View Full Version : Light up 12" scale lightsaber!
K M Toydarian
10-04-2002, 05:13 AM
Inspired by the electronic Obi Wan and a few posts in the review thread, I tried my hand at a light up Anakin saber. I'm pretty happy with it. It is a tad wider than his plastic saber, but it doesn't look too bad. I made it from a small led light from target. It is silver metal and has a blue LED. I had to switch the bulbs, as the silver case had a white light, and the blue light had a blue case, which was actually goldish metal with blue paint. (I'll use it for a different saber.)
It cut off the trim from 12" Anakin's saber to glue onto the metal one.
The light was on clearance at Target for 2 bucks. They had others at regular price as well. A double Maul saber would rock! I can't wait to try.
K M Toydarian
10-04-2002, 05:16 AM
Here's another view. You can;t see the light up effect very well, but it looks the same as the eltronic Obi Wan. It is really bright. The blade is from Electronic Obi Wan until I can get an acrylic dowel that will work.
10-04-2002, 04:37 PM
Pretty cool! What powers the lightsaber? And can it be replaced if it should die?
10-04-2002, 05:26 PM
I've been totally against do any alterations to my figures, but I do have to say that is friggin cool what you did to that saber. Looks like I'll be hittin Target tonight. :)
10-04-2002, 06:06 PM
That is super cool! Great work.
How thick is the metal casing? Could someone make a thinner plastic casing in its place or would that compromise the electronics? How does the switch work?
10-04-2002, 06:20 PM
10-04-2002, 11:48 PM
Darn! I couldn't get any help at Target. Everyone I asked had this thousand mile stare on their face. Whats the led name? Brand?
10-05-2002, 12:04 AM
I've seen these at my local Target on a end of aisle display in or near the automobile accessories section. They come in a bubble/cardboard package and look just like a little lightsaber. They might orginally a key chain thing so I'd ask along those lines when searching the store.
I can't believe I never thought to put one with a 12" figure.
10-05-2002, 02:40 AM
Thanks for the info Exhaust Port. I'm gonna have to try again tomorrow afternoon.:)
10-06-2002, 08:27 PM
I was looking at my wifes keys today and noticed she had a LED light on it. It's a red LED and when you take it apart, it's really small and would probably fit it a hollowed out hilt. Here's a few photos. 1st is the complete light
10-06-2002, 08:29 PM
here's one with only the LED
10-06-2002, 08:31 PM
10-06-2002, 08:46 PM
That is tiny. Are you going to try in a hollowed out hilt?
I found the led's at Target, and I'm going to get started on Anakins saber tonight after the kids go to bed. I can't post pics, but I'll let you guy's know how it turns out.:)
10-07-2002, 01:38 PM
Looking forward to it mini-rock.
mini-rock, where exactly did you find them in Target? I'm not having much luck with my local Target 'associates' :(
10-07-2002, 10:37 PM
The LED's I found were in the automotive department. I felt pretty stupid after I realized I walked by them 30 times. They were right in front of me. :)
10-08-2002, 01:33 AM
I have a blue LED keychain that is super bright but a little wider than the red LEDs I have around here. I wonder if the blue LED could be carved into.
10-08-2002, 07:08 PM
Originally posted by JediTricks
I have a blue LED keychain that is super bright but a little wider than the red LEDs I have around here. I wonder if the blue LED could be carved into. I'm sure you could cut into it, but the plastic will probably turn white, or cloudy.
10-10-2002, 09:50 PM
Well, I finished it, and I do think it looks pretty good. It would be really nice if Hasbro did this with all the 12" Jedi figs.
10-11-2002, 05:51 AM
I went to target and saw a bunch of keychain lights, but they all looked too large in diameter to be what we're talking about here, they all took the A76 button cells (most took 3 of 'em). Is this correct?
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.