PDA

View Full Version : Evolutions - The Fett Legacy review



JediTricks
03-01-2008, 11:58 PM
"Boba Fett" - few names conjure up more about Star Wars, and Star Wars marketing. From his cartoon debut to a handful of lines and some attitude, to a mockable death, Boba Fett has certainly been a noteworthy creation. The Evolutions line is meant as a higher-quality collectible line in the same vein as Hasbro's vintage-style line, and here Boba Fett and his kin get realized.

Packaging: 3/5
The original Evolutions packaging was a bit over the top and wasteful, this is a more slimmed down, smiple affair but with creative shapes that fit with the current design styling. This box doesn't show off the additional accessories inside, despite an arrow pointing out they're there, kind of a cheat. The graphics are Jango-centric, but bold. The figure trays look a little plain though, the images behind them are totally lost. Once you buy the set, you can slide the tray out to view the 3 underwhelming additional accessories - why they hid the 2 figures' jetpacks behind them instead of putting them here, I don't get.

The packaging is fairly collector-friendly in that nothing has to be damaged beyond tape to get it out, and it can all be put back in with minimal fuss. It's a bit convoluted but if you study and cut in the right places, it works out. Each figure is held in with clearbands which need to be cut, they're troublesome. Boba's blaster is fairly bent by the positioning but the rest of the accessories come out fine.

Sculpt-Design: 4/5 (Mandalore); 4/5 (Jango Fett); 4.5/5 (Boba Fett)
Mandalore the Indomitable has that "pre-Prequel" look, it's a very flowing, wrinkled sculpt, it doesn't look all that exciting but there is actually enough going on. The shoulders are surrounded by armor (it appears that it could be removable, I don't care to try though) which has a good sculpt and accepts the head's 2 hoses, and is also pliable enough for the figure to raise his arms. The head is a little small, it'd be ok from the front but the sides say it's very pin-headed, maybe they were going for a head lower on the neck but it doesn't quite translate, I do like the look and the hoses though. There's a fabric cape which is the biggest downside, it's just too much of a mismatch to the rest of the figure and too see-through.

Jango's finally got the sculpt we've been looking for, the armor's very accurate and tightly detailed. Jango's got separate hoses for his gauntlets, and a very nice separate gunbelt which is unusual as it's a midway plate between the torso and waist and kind of looks like a belly. The helmet is a little narrow and too tall, but does a fair job hiding the head. The head beneath is somewhat recognizable, but I've seen Hasbro deliver better, and this doesn't even have his scars. I really wish they'd have included a second helmet-only head with the accessories. My biggest issues are the hands, very pre-posed for a specific pistol pose which is a little frustrating; and the figure is way too tall for the character, he's noticeably taller than stormtrooper and clonetrooper figures.

Boba's look was already cemented with the vintage-style VOTC figure from 4 years ago, but that was the ROTJ version, this Evo figure is the ESB version and there are differences. This Evo body upps the detail ante quite a bit upon close inspection, yet some aspects on the VOTC like the gauntlets are a little better. A big design change is the shoulders, which are now slotted into the shoulder armor for increased range of motion; one design that stayed the same is the collar armor being a separate piece, it still doesn't quite integrate here either. I love the simple yet incredibly effective hip holster for the pistol, very clever. This is the first Boba with a removable helmet, and underath is a scarred Jango clone helmet wearing the "sock" which I love that they did, my only frustration is that the sock doesn't cover the chin!!! What's the point of having that yet leaving the most important aspect out? Boba's helmet is a fair representation and covers the head ok, though if you angle it wrong his nose will bulge the visor. The helmet's design seem more like the ROTJ version, odd since the VOTC figure's seems more like the ESB version (the old switcheroo?). Again, I wish they had included a second helmet-only head. One unusual aspect about this Boba is the fabric cape, this one is very long, actually touching the ground, it's not accurate that way and it does kinda push the jetpack out, but the length lets him wear it in front of him like early Boba promotional photos which is very cool.

Articulation: 5/5 (Mandalore); 4.5/5 (Jango Fett); 5/5 (Boba Fett)
Mandalore is pretty much "super articulated" to current quality, though his mid-torso is a standard swivel waist rather than a more complex affair. Despite his shoulder armor and plastic skirt, he's not particularly limited in range of motion. The ball-jointed head can't look down, but otherwise is par for the course with this style of articulation.

Jango's got super-articulation as well, including a mid-torso joint that lets him lean forward or back as well as swivel around. Thee's nothing really getting in the way of articulation, though his hands' design limits some kinds of poses. The head moves ok, nothing spectacular but decent. I'm taking the score down a little though for the mid-torso, which cannot lean side-to-side for what appears to be an entirely arbitrary reason, it's some of the most emotive body articulation a figure could have and they didn't include it. I also feel that the legs are a little too close together, it's fine for standing at attention but a bit lacking for more dynamic posing.

Boba's got super articulation, and also has the enhanced mid-torso jointing, only here they got it right and he can lean side-to-side! Weird! The shoulder articulation design here has better range than the VOTC Boba, but affects the deco so it's a mixed blessing. Like Jango, the legs are a little too close together, but Boba's not the action man his pop was, so it's not as big a deal. The head articulation can't look downward at all, which is a shame since that's one of the ESB signature looks for Boba - still, it's a relatively small nit so I'm not lowering the score.

Paint-Deco: 3/5 (Mandalore); 4/5 (Jango Fett); 3.5/5 (Boba Fett)
Mandalore has a fairly one-note coloring, he's dark burgandy with black accents and a black paint wash. He comes off plain, the character's a little more lively of red but comics characters don't always translate well here; the black wash really brings out the sculpting well. His visor adds a dull bronze tone, but it's not much of a standout and not entirely accurate. The character has small gold circle designs on either forearm, the paint they put in to emulate it seems a tad last-minute.

Jango has some stuff that's very right, and some stuff that's very wrong, and the head's deco comes somewhere in between. The very right is the silver armor elements which look amazingly sharp, although not quite as bright as the real McCoy, still very metallic and slick. There's also the brown gunbelt with black wash and silver elements, this looks great. Unfortunately, the big failure of this figure is that the jumpsuit's coloring is purple like Zam Wesell rather than the faded blue it should have been. This isn't even close to right, it's really lavender in color! Still, despite this bad choice, the paint is very cleanly applied and has plenty going on which somewhat salvages the botched lavender jumpsuit.

Boba's deco is the ESB design, muted and less colorful than the ROTJ design. The jumpsuit is a light olive drab, the shoulder armor's yellow is quieter than the VOTC figure, the gauntlets and backpack green rather than red. There's a really keen subtle metallic dry-brushing across the chest armor which officially raises the deco bar for all other armored figures out there. The white paint on the hoses and gloves is a little sloppy, but most white elements have a gray wash with helps them out a lot. Frustratingly, the new shoulder armor design has the bantha skull logo on the left shoulder shrunken and moved down from center. The wookiee braids over the right arm are still sloppy as ever. And while the red lights are painted in the chest armor, the logo on the opposite side is notoriously missing. Like the others, a lot works and some stuff doesn't.

Accessories: 3.5/5 (Mandalore); 4/5 (Jango Fett); 4.5/5 (Boba Fett)
Mandalore comes with an axe, a pike, and a small leather-looking shield. The axe is cool and well-painted. The pike has a weird top, it's not quite comic-accurate but gets the idea across. The shield is a tad underwhelming, but it does have a handle and a plastic armstrap. There's a hole in the back of the shoulder armor which I believe the shield is supposed to plug into, but it doesn't quite fit - the handle and strap are just the right distance to wedge around the armor though so it looks the same.

Jango comes with the removable helmet, like I said, it's a little too long, and the rangefinder is not movable and way too long. I don't know if this is a reuse of a previous helmet, Hasbro did a lot of them back in the 2002 Saga line, but I put them all away since none really delivered. Jango's also got his pistols, pretty sure they're reuses but they're good enough, and they fit in the holsters well. Oddly, the pistols are cast in gray but the upper parts are painted silver, it's a good idea but these guns weren't 2-tone. He's also got a jetpack, the one with the shorter missile, this appears to be a new sculpt and is hollow on the inside, but fits well on the figure. My favorite accessory is his removable pilot headset, this thing looks GREAT on the head, it's perfect and fits so well, a simple little thing but very nifty. Still, he could have had more stuff like a second, helmet-only head, the other jetpack, blast flames, the whip cord, fire, etc, which impacts the score.

Boba Fett does next to nothing in ESB. The figure has a removable helmet which is quite different from dad's, it has a more accurate shape and pretty decent weathered paint. He's also sporting a new pistol, one which supposedly is accurate to the one he carried in ESB and differs from the one in pre-production photos, it's a little big but it has a little silver paint to liven it, and fits in the hip holster well. He's also got the standard Fett jetpack, it's alright but nothing stellar, paint is underwhelming but accurate, and it doesn't stay in his back all that well (again!). Finally, the big deal, an all-new, ESB-accurate blaster with primo sculpting and fantastic paint, they knocked it out of the park with this one. Unlike Jango, there's not much else this figure could have used, just the second helmet-only head really, but he too feels a tad light.

Overall: B+
The whole set gets a B+, as each individual figure pretty much goes there. Mandalore is a fine execution of a figure I didn't really want, it's got the small head and plain deco, but is adequate to hang with my Star Wars guys. Jango has a lot going right for him that previous versions didn't get, but he also has the lavender jumpsuit, excess height, and low accessory count, I dig him and he's probably the best we'll ever get, but not quite as awesome as he could be. Evo Boba is like the flip side to the VOTC figure which is a very good thing, and in some ways outdoes that figure, but in others underperforms it, and another Boba figure with missing deco elements is a tragedy after 13 years of this crap. Still, Boba chiefly works for what he's supposed to be.

Jayspawn
03-02-2008, 07:27 PM
Thanks for the review! I love this set! The Boba is my favorite but Jango is a wonderful upgrade too. The Boba in this set is my new favorite/prefered Boba.

plasticfetish
03-03-2008, 03:26 AM
I'm a little confused about this set... what "Knights of the Old Republic" is this particular Mandalore from? This guy's from the comic book Tales of the Jedi: The Sith War, isn't he?

From KOTOR, I was kind of hoping for a Canderous Ordo figure. Would have been a lot cooler looking, with much better weapons. (I'm not really into the whole axe and shield thing.)

Still though, I saw this set the other day and liked it. Given that JT actually gave it such a decent grade, I'll more than likely give it a try now.

JediTricks
03-03-2008, 11:38 PM
He was MENTIONED in KOTOR #8, way to make a stretch, right?

A buddy of mine found a set last night with a sticker over the Boba's name, turned out the box originally said "Return of the Jedi" underneath - way to go hasbro! :p


Yeah, it's a decent set. B+ might be a half-point generous or a half-point unforgiving depending on your type of collecting, but B or A- is still a very solid score. I'm not surprised it's the hardest to get, even with Mandalore the Forgettable in there.

Tycho
03-04-2008, 03:35 AM
I'm a little confused about this set... what "Knights of the Old Republic" is this particular Mandalore from? This guy's from the comic book Tales of the Jedi: The Sith War, isn't he?



Probably not, but the characters might look identical. It is the same helmet.

In The Sith War, Ulic as a Sith Lord conquered and enslaved Mandalore, and since that time, Mandalorians were supposed to yeild to the dominance of the Sith, or it was just that the Sith always found them useful.

When Exar fell to the Jedi army and Nomi defeated Ulic, Mandalore escaped. He tried to obtain Sith weapons from the Dxun Moon and was killed there. One of his soldiers took his armor and proclaimed himself the new Mandalore.

If anyone else wanted the title, they'd have to kill him for it.

I don't know if that ever happened, or this individual who survived Dxun is the same Mandalore in KOTOR.

I think the figure must be KOTOR intended though, because they made Revan and Maleck.

It would be cool if they made Ulic, Nomi, and Exar as you surely can use Mandalore for that era - which is what I'm saving him in hopes of, as the TOTJ stuff is some of the best EU that's ever been put out there.

Meanwhile, I love the figure. JediTricks basically did a great review so I don't know if there's anything else I can add to it.

I might be interested in trading for another though. I can offer another Qui-Gon Evolutions or Vader Evolutions at this point. I did the same trade with JediMasterSal which is how I obtained my Mandalore.

plasticfetish
03-04-2008, 04:22 AM
He was MENTIONED in KOTOR #8, way to make a stretch, right?Yeah, that's a bit of a stretch... but I suppose it's the thought that counts. :rolleyes:

But seriously, I'm not against them making all of the Mandalore figures (Indomitable, Ultimate, Canderous Ordo, Chico, Harpo, Groucho, Zeppo, etc.), it just would have been nice if they'd attributed this one to the correct source... and if they'd go and make Canderous now. ;)

JediTricks
03-04-2008, 08:14 PM
Here's what I don't get, Mandalore the Indomitable, the one we got, is featured in a handful of issues of TOTJ, and he seems to be a rather minor player in that era compared to his successor, the one who took his helmet, Mandalore the Ultimate who appears to be a major player in KOTOR yet we don't get HIM as the figure. Here are their entries, notice which one has more detail:
http://starwars.wikia.com/wiki/Mandalore_the_Indomitable
http://starwars.wikia.com/wiki/Mandalore_the_Ultimate

Also, note that the outfit for Indomitable is significantly different from Ultimate's.

plasticfetish
03-04-2008, 09:02 PM
Neither Mandalore the Indomitable or Ultimate are really in KOTOR. The game takes up right after their deaths... after the war. It's Canderous Ordo (http://images.wikia.com/starwars/images/b/bb/CanderousOrdoOnTheRavager.jpg) (who becomes Mandalore), that is a playable character in the game.

I get the feeling that they had old Indomitable cooked up for one of the comic 2-packs or something, so they just ran with him for this set. (All of which were gone when I checked back today. Oh well.)

JediTricks
03-04-2008, 11:49 PM
KOTOR is also a series of comic books, Manny the Ultimate appears in quite a bit of those.


I kinda felt like Manny the Indomitable was thrown in to round out this set and they would never have made him or the other guy without this Evo set to hang him on.

Tycho
03-04-2008, 11:52 PM
What they might do is a variation on Mandalore to include him in a TOTJ comic 2-pack, most likely with Exar.

In our EU polling, Exar Kun, Ulic Qel Droma, and Nomi Sunrider are constantly in the Top 25, and I think it was the Top 15, too (not looking at the results at the moment).

While Ulic enslaved Mandalore and started the Sith's relationship with the Mandalorians, Exar did not interact with Nomi that much - she didn't defeat him in a personal duel - he was too powerful for that.

So since they were lovers at one point, I'd say Ulic and Nomi would make a comic 2-pack, and Exar might be included with the re-release of Mandalore.

There are other strong "b-characters" from TOTJ, but these are the major players, "the Han, Luke, Leia" if you will, but in that era, most were Sith (not Nomi obviously).

When Mark@Rebelscum (QuestionMark), formerly HunterESB, and I were doing joint-site polls back in the day in conjunction with Rogues' Gallery, we polled for the entire cast of TOTJ, b-characters and all, in light of our interest in a diorama-friendly collection. Other options included:

Cay Qel Droma
Master Arca
Sylvar
Tetan (Sith / Krath) War Droids (battle droids)
Onderron City Warriors (Sith-allied, sort of proto-bikerscouts)
Beast Riders (exiled primative warriors on Onderron who'd really need large beasts to ride)
Mandalorian Warriors - generics in various armor (ancient style) perhaps on open-air war droid mounts
The Sith adepts in the Royalty on Onderron (Queen Amoana, King Omin)
Warb Null (Armored Sith Warrior - a fallen Jedi)
Ghost of Freedon Nadd (a Sith Lord)
Master Thon - a beast assortment figure, Jedi Master
Master Vodo - Exar's Jedi Master

and many more that are too far down the barrel on the EU figure want list to continue with at this point (versus demand for characters like Jaina and Jacen Solo or Darth Krayyt) but Tales of the Jedi's most invested fans would know the characters and want them all.

KOTOR and Legacy are current Dark Horse efforts to make another such comic epic like TOTJ, but it is not even close to recapturing that achievement. The problem is that TOTJ is an effort from 1998 which only "early modern-age" fans remember. Those that joined the bandwagon after 1999's prequels started in the movie theaters, would not likely know this series.

Those of us around since at least 1995 (I'm old school KENNER DAY vintage originally, myself) know and remember TOTJ with huge affection.

But the realities and practicality of modern marketing would suggest that more attention on KOTOR and Legacy would benefit the joint figure-comic market of today that much better for sales purposes - the ultimate reason why they are in business.

So we're back to Ulic, Nomi, and Exar being extremely smart for Hasbro to produce, but maybe not much from TOTJ beyond that. But one can only hope for more. Still, without even having the big 3 from this series, we at least have to get over that hurdle first.

It's nice to have Mandalore, as he'd be one of the leading B-characters and thus not one you could count on if you did get the big 3. Thus I think it's safe to bet on Ulic, Exar, and Nomi coming out by 2009 with some certainty.

JediTricks
03-05-2008, 12:10 AM
I... sure like having a Jango Fett figure. :p


As far as I understand it, Manny the Eye is not a B- or C-level character, it's Manny the You that is at that level.

plasticfetish
03-05-2008, 03:43 AM
I... sure like having a Jango Fett figure.Say what you will, but when we (the kid and I) were looking at this set the other day, he got all excited about that figure. He was way into it.

I'm still not sure why we didn't get the set then. :upset:

El Chuxter
03-05-2008, 09:30 AM
The figure in the set is Mandalore the Parking Attendant.

JediTricks
03-05-2008, 03:47 PM
Mandalore the Incontinent.

plasticfetish
03-05-2008, 10:52 PM
Mandalore the Brown.

JediTricks
03-06-2008, 03:13 PM
Mandalore the Hershey Maroon

sebillba
03-08-2008, 04:07 AM
I opened mine yesterday, and while the Fetts, Jango in particular, are undeniable upgrades, there were still a couple of faults that irked me.

The first thing is the cut bicep joints - the upper part of the joint is way bigger than the lower, so the two parts don't really line up. I noticed it more on Jango, as in the packaging the arm looked painfully out of skew. When I got him out, I tried twisting it round, but it still didn't look right - it only lined up when it was facing the wrong way, and I thought maybe they'd got left and right parts mixed up on mine. And then, suddenly it did look ok, and I realised that as well as twisting at this joint, it could also slide back and forth..... only on the right arm though, so I don't think it's supposed to do this, and it would be pretty pointless if it was intended.

The next thing I noticed - not only is Jango's body suit garish purple, but his head is cast from the same colour plastic, and then sloppily painted with skin tones. I don't know if it's just me, but I have a real problem with heads with painted flesh - why not just mould it in flesh coloured plastic in the first place?? Boba's is the same, though cast from white plastic, which doesn't bug me so much, as it's the colour of the head sock, which forms the bulk of the head (though I would've still preferred a flesh head with painted on sock!), but there was no reason at all the use purple plastic on Jango's head! It wouldn't have been quite so bad if it was a decent paint app, but it's pitted, scuffed, uneven and sloppy. Guess I'll just have to pretend it's battle ravaged. Or maybe just swap it with another clone head.

Edit: Just remembered my Jango is also wonky at his waist. Overall, not exactly the ultimate Jango I was hoping for!

JediTricks
03-08-2008, 03:01 PM
The first thing is the cut bicep joints - the upper part of the joint is way bigger than the lower, so the two parts don't really line up. I noticed it more on Jango, as in the packaging the arm looked painfully out of skew. When I got him out, I tried twisting it round, but it still didn't look right - it only lined up when it was facing the wrong way, and I thought maybe they'd got left and right parts mixed up on mine. And then, suddenly it did look ok, and I realised that as well as twisting at this joint, it could also slide back and forth..... only on the right arm though, so I don't think it's supposed to do this, and it would be pretty pointless if it was intended.If you look at the real costume, you'll see it's like that with a layer break, the sleeve is actually 2 sleeves, the outer armor-shirt part with t-shirt-length sleeves, and then under that the regular jumpsuit with full-length sleeves, and coming out of the t-shirt-length one are hoses. But it does look a little odd on the toy, even the VOTC has this.


The next thing I noticed - not only is Jango's body suit garish purple, but his head is cast from the same colour plastic, and then sloppily painted with skin tones. I don't know if it's just me, but I have a real problem with heads with painted flesh - why not just mould it in flesh coloured plastic in the first place??Weird, I didn't notice his head was cast in purple. Most of the clones' heads are painted instead of cast color, so I'm used to it, and my Jango wasn't that sloppy. They're trying to save a buck on these guys by shooting them on the same mold as the other parts.

sebillba
03-08-2008, 03:53 PM
If you look at the real costume, you'll see it's like that with a layer break, the sleeve is actually 2 sleeves, the outer armor-shirt part with t-shirt-length sleeves, and then under that the regular jumpsuit with full-length sleeves, and coming out of the t-shirt-length one are hoses. But it does look a little odd on the toy, even the VOTC has this.


Thanks JT. After I posted, I was looking at pics of the VOTC on RS (I was at work, so couldn't look at the figure), and noticed it had similar joints, so wondered if it was supposed to be a separate t-shirt. Now I look at the costume again, I can see it, though it's not so obvious. Seeing as the hoses are coming out from under the t-shirt sleeves, it would be better if the overhang was at the back rather than the front - on mine, the parts are flush at the back, so it doesn't look like the hoses are coming out of the t-shirt. It's a detail I wouldn't normally notice (well I didn't with the VOTC), but as I say, the right arm on mine was so glaringly mismatched, it instantly bugged me.

And funnily enough, I've not really noticed other clones with painted faces, but then I've been cloned out for so long, I obviously haven't been paying too close attention. It is something that usually annoys me though - it totally ruined Mara Jade for me.... I still prefer the old POTF2 version because of that!

jedibear
03-08-2008, 08:32 PM
These are the comments I posted here...http://http://forums.sirstevesguide.com/showthread.php?t=37323&page=7...and while I stand by most of 'em...I have updated here and there after taking in JT's rather thorough review, other folks comments, and my own obeservations after having this set on my desk for a few days...

First impressions...I'm not as disappointed as I expected to be after all I've read on different boards, but some of the negative points brought up about these figures are valid...but as an "Evolutions" set, it is good with the concept...and as far as Jango goes, it's a definite improvement over earlier versions. Actually both Jango and Boba are great steps forward as far as what we've seen previously...

I've got some shots at the bottom of my post, but first some comments...

The Mandalore...
This is without a doubt, the best of the three here. I don't know much about the source material this guy is from, but he's a striking enough design that I'm definitely going to check out KOTOR now...he just looks like a tough warrior. I like the accessories, especially the ax and the cape looks good too...not too overdone. I really like this figure! And yes, he's getting some good-natured grief in here, but for me, he's still the coolest looking one in the set! And I appreciate all the feedback on the source maetrail this guy comes from...looks like I've got even MORE reading to catch up on! :)

Jango Fett...
While I'm at a loss as to why his coveralls lean towards a violet hue, the plating has never looked better, especially the chest plates. It could be the material used...his torso is a hard plastic instead of the softer grade usually used for figures (the limbs still feature the standard plastic)...the harder plastic allows for sharper detail and it really pays off with the armor. It's good to have arms articulated enough to aim his guns more naturally ...but I'm with JT here...a spare set of more neutral hands would have been good...earlier versions made this difficult (especially that preview figure one). I lucked out with my gun belt... the holsters don't seem to stick out to the sides like so many folks have mentioned. It's slightly distracting to have the shin straps missing, but the detail on the belt itself helps make up for that. The helmet...it's not the oversize that bothers me, it's the permanently upright rangefinder...and yes, the second jet pack would have made a good accessory as well, along with the poncho currently featured with the carded "casual attire" version.
Jango is a fair improvement over previous figures, but hopefully the future will bring us a color-corrected one on a card or in a battle pack...and staring at him now, one thing that is really great with both Jango and Boba is how the articulation/sculpt allows a much more realistic stance, even when just posed "standing" there...not ramrod straight like the usual figures do... As to the jumpsuit color...well, I think its a safe bet that we'll see this figure released somewhere done the line with that corrected...maybe not for this set, but carded or in some BattlePack set...

Boba Fett...
Out of the three, Boba is the one who suffers from a "been there, done that...better" kind of feeling alright...I'm a little too harsh here......plus, he looks almost soft and unfinished with the exception of the chest/torso areas made from that harder plastic, I stand by this...yes, the shin tools are better and the sculpt is there, but because of the different grade of plastic (softer) used compared to the torso, some of the detail is lost...the lighter paint.color scheme brings that out a bit too...while his whole paint scheme here is thankfully more muted than some earlier versions, the lack of small details (most notably the chest emblem)is readily apparent. His body is basically Jango's...just re-painted in Boba's color scheme oops...no it's not! A closer examination shows the subtle differences, JT...this is NOT the same torso as Jango's...I stand corrected, sir.... The figure from this set also has a heck of a time keeping his jet pack on.
On the plus side, the guns seem better detailed than previous efforts and he does feature good articulation. The cape is a little more worn and tattered-looking as it should be as well. But it almost seems like the 300th figure of him is still the reigning version......at the very least, that version stands up well with this one...a ROTJ version along with this ESB one...

This is a good set featuring a character worthy of the "evolutions" concept and treatment but some of the details should have been kicked up a notch or two to make it truly great. ...and man, have we seen a couple of figures generate as much good-spirited discussion and debate as these two in here lately? Not in recent memory! They ARE great figures in a good set...
So far, the Sith seem to rule this wave of "Evolutions" with the "Force Unleashed" gang right up there too...

Tycho
03-08-2008, 08:54 PM
JediBear, forget KOTOR.

Read:

Tales of the Jedi: "Knights of the Old Republic" - different from KOTOR but prior to it

Tales of the Jedi: "The Freedon Nadd Uprising"

Tales of the Jedi: "Dark Lords of the Sith"

Tales of the Jedi: "The Sith War"

Tales of the Jedi: "Redemption"

Mandalore as packaged in the 3-pack is from that series. He dies, and his successor dons his mask for KOTOR, which is not as good. There are 26 issues altogether (all in bound paperbacks now) from TOTJ - mostly from 1997-1998, maybe 1999.

And now KOTOR is up to the same amount of issues, but isn't even as close to being as good. Everyone here that has been posting praise for the comics are posting it for the TOTJ '97 / '98 stuff. That rocked!

If your focus in on Ulic Qel Droma, then Nomi Surider, and finally Exar Kun, you're reading the right one.

Zayne Carrick stars in the other one that Dark Horse is publishing currently. It passes the time, and not painfully, but the misadventures of a failed padawan is nowhere near the epic of a fallen Jedi war hero turned to being one of the ultimate Dark Lords of the Sith!

jedibear
03-08-2008, 11:49 PM
Thanks Tycho...printed up your list...I'll check those out!

JediTricks
03-09-2008, 07:39 PM
http://starwars.wikia.com/wiki/Tales_of_the_Jedi:_The_Sith_War_%28TPB%29 That one covers all the issues that this guy is actually seen in and nothing else. It's been a while since its release though, and Dark Horse is doing an omnibus version next month though that will also contain those stories: http://starwars.wikia.com/wiki/Omnibus:_Tales_of_the_Jedi_Volume_2

Old Fossil
03-15-2008, 10:19 PM
Finally found this set tonight at TRU... why did we have to wait five-six years to get this great Jango figure? Despite the lavender jumpsuit, I am very pleased with it overall.

This Boba Fett figure is now my favorite sculpt of this character.

Mandalore will be in a storage container within 24 hours.:squareeye

JON9000
03-16-2008, 08:50 AM
Ugh, I was gonna skip this but you guys are making it awfully difficult with all the high praise! :)

JetsAndHeels
03-16-2008, 10:55 PM
Well JON, allow me to add more praise. :)

I have wanted a Jango like this since 2002, and now I finally have one. I think the articulation on him is great. Even though you cant do much with his hands, the rest is just fine.

The Boba is a great figure as well. I agree with what JT said in his review about the sock though...not sure why the chin is exposed, but still it does not take away my enjoyment of the figure. Its my favorite Boba overall, while the 300th was my previous one.

Mandalore seems ok, but honestly he isnt the reason I bought this set.

JediTricks
03-18-2008, 03:54 AM
Yeah, the sock problem is the same on the Stormtrooper figure, I haven't checked yet but I suspect it's the same head with new paint.

Deoxyribonucleic
03-18-2008, 12:36 PM
Yeah, the sock problem is the same on the Stormtrooper figure, I haven't checked yet but I suspect it's the same head with new paint.

Here, let me get one of my stormtroopers...hmmm, can't seem to find any...should have gotten more while I had the chance ;)

Alas, it is the exact same head. Dun dun Duuuuuuuuuuuuuuuuuuuuun!!!!!

JediTricks
03-18-2008, 09:54 PM
Natch! Classy fellows up in Rhode Island. At least me am smardt!

figrin bran
03-20-2008, 10:05 PM
This set will get rereleased with Boba + chest emblem later on in the year or early next year.

(arrrgghh. I vow not to shell out $20 again for it!)

JediTricks
03-20-2008, 10:33 PM
I may buy it and then return the one I have in its place. And it's only correcting Boba's missing emblem so far, not the lavender jumpsuit on Jango.

Old Fossil
03-27-2008, 12:10 PM
Jango has some stuff that's very right, and some stuff that's very wrong, and the head's deco comes somewhere in between. The very right is the silver armor elements which look amazingly sharp, although not quite as bright as the real McCoy, still very metallic and slick.



I really dig the metallic look they pulled off for Jango's helmet. I wonder if they could do that for R2-D2? Seems like that would be about right, at least for a dirty ANH R2.

Deoxyribonucleic
03-27-2008, 01:04 PM
This set will get rereleased with Boba + chest emblem later on in the year or early next year.

(arrrgghh. I vow not to shell out $20 again for it!)

Is this for real? Where'd you hear about this Mr. Bran? :) Like you I wouldn't want to shell out $20 for it but I SOOO love this Boba Fett and to have him with the emblem, well, it's extremely tempting.

Maybe they'll put him on a single card?

Mr. JabbaJohnL
03-27-2008, 01:48 PM
It was in the most recent Hasbro Q&A somewhere.

I got this set but thankfully heard about the emblem change before opening it, so I'm just going to return it and get the more accurate one when it comes out.

JediTricks
03-29-2008, 12:45 AM
I really dig the metallic look they pulled off for Jango's helmet. I wonder if they could do that for R2-D2? Seems like that would be about right, at least for a dirty ANH R2.They could, and possibly even more silver, look at the TRU-exclusive silver-painted giveaway figures, that silver is brilliant. We asked Hasbro about this waaaay back in the day, they kinda hemmed and hawed.


Is this for real? Where'd you hear about this Mr. Bran? :) Like you I wouldn't want to shell out $20 for it but I SOOO love this Boba Fett and to have him with the emblem, well, it's extremely tempting.

Maybe they'll put him on a single card?Last week:

Rebelscum.com: Many collectors are passing on the Fett evolution set and are wanting some changes to Boba and Jango. Jango is too purple and should be more blue, Boba's color is off and he is missing the icon on his chest plate. The helmets on both are somewhat warped as well. Is there any chance that Boba and Jango will see single carded releases with these changes?
Hasbro: The Evolution of the Fett clan will run through 2009, and we will be updating to a version with the tampo (a regrettable error). Right now, we don't have any plans to offer these on basic figure cards.

plasticfetish
04-07-2008, 04:41 AM
I was going to wait 'til the "repaint" turned up, but this Fett set found its way into my house anyway, so... here's a lovely bunch of photos for the Database.

http://photos.sirstevesguide.com/showgallery.php?cat=5641

And I'll just point out, that if this set is hard to find, it's probably got just as much to do with kids buying it as anything else. ;)

Devo
08-08-2008, 06:42 PM
Only just got the reissue of this set today. Never had the first one. They're good figures. My only complaint is the helmets being too small and narrow in relation to the bodies. A future headswap is in order. The holsters on my jango fett don't stick out nearly as much as photos I've seen so I'm happy about that. Don't get why he's lavender but I'm not that fussy about prequel stuff and plan to quit prequel toys for good once I get a few more 'definitive figure' core characters. If jango gets single carded with the correct colouring I might buy him again. I'll definitely buy 2 or 3 more of this Fett single carded as he inevitably will be.

AllieBow
09-16-2008, 02:58 PM
Only just got the reissue of this set today.

Is the reissue the one in a white box? I got my son the one in the black packaging a few months ago. It was on clearance at Target for around $5, so I'm not too upset about the minor mistakes.

Is the Boba Fett in the older one (black box) better than the single Saga Legends one (that comes with the coin) No. 87052/85770?

I plan to keep one and give the other away as a birthday present.

noahj
08-31-2009, 03:51 PM
The jetpack with the missile is called a Mitrinomon Z-6. The blue and grey jetpack jango comes with a Merr Sonn DX-7

noahj
08-31-2009, 03:57 PM
Boba's my favorite 2