Results 1 to 4 of 4
  1. #1

    Question Custom Army Building Using Boil-and-Pop?

    Three wee points, and I'll be grateful for ANY feedback:


    1) I've just discovered that the following POTJ/Saga figures all have interchangeable helmets/headgear:

    - Bespin Guard (POTJ);
    - Naboo Royal Guard (goatee, maroon outfit);
    - Endor Rebel Soldier (Saga - I'm fortunate enough to have both the bearded and the non-bearded versions, thanks to a very good local supplier).

    My question (before I buy extra copies of all these figures and try it for myself) is this: has anyone tried swapping any combination of these heads around, and, if so, how well do they fit with regard to head-to-neck size?

    I reckon it should be possible to make at least two new versions of each of these three figures, if the heads fit!


    2) Also, I have a surplus Bespin Guard from the POTJ Carbon Freezing Chamber playset whose right hand broke off so that I had to reglue it (I later bought a replacement).
    I'm minded to swap his head onto a separate POTJ Bespin Guard body and use that head elsewhere, but I'd appreciate knowing in advance if it will fit without too much paring.


    3) Has anyone considered making a custom Bail Organa from the head of EITHER the Endor Rebel (bearded) OR the Naboo Royal Guard and a body TBC (Chancellor Valorum)?


    I'm very much a beginner at customizing (haven't done much more than removal and re-application of paint and ink before), so I'd be grateful to hear of anyone who's made any headway in this area.

    If I don't get any feedback on this in the next week or three - depending on how well I can get hold of duplicates of the figures in question - I'll try to post photos of any progress I make here in these fora; but any advice from anyone who's been there already would be great.

    Thanks!
    Last edited by kdp100; 08-12-2002 at 07:20 PM.
    "Afterlife, aftershave - don't hold with any of it!" - Sir Henry Rawlinson.

  2. #2
    i didnt get a word of that
    ( .A.O.T.C. )

    It's always nice to meat a Jedi.

    - Jango Fett

  3. #3
    I did a head swap with the Bespin Guard and the bearded Endor Soldier. I think I posted the pic in the ROTJ and ESB sections.

    Anyway, the neck of the ERS is longer than that of the Bespin Guard. I ended up trimming back the ERS neck to keep him from looking like Taun We.
    Yo momma. That's right, I said "yo momma".

  4. #4
    Thanks for the advice Rogue II! I'll have a look there!

    Later . . .
    Looks good!
    I wonder what the POTJ Bespin Guard body will look like when I put the head of my Carbon-Chamber pack-in Bespin Guard's head on it?!
    Last edited by kdp100; 08-19-2002 at 06:51 AM.
    "Afterlife, aftershave - don't hold with any of it!" - Sir Henry Rawlinson.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO