Page 1 of 7 12345 ... LastLast
Results 1 to 10 of 62
  1. #1

    QUESTIONS FOR HASBRO - round 70

    Please post your VOTE for up to 6 {six} of the questions provided in this thread, letting us know which ones you most want to see asked on July 2nd. Keep in mind that your votes in round 69 do not count in this round, so if your question is still on the list you may want to vote for it again.

    Also, feel free to post new questions. For reference, here are Hasbro's answers to previous SSG questions; and from other sites. The questions we asked last round can be found here.

    Current questions (vote for up to 6):

    1. - In Hasbro's awesome Comic-Packs line, we've been treated to Marvel Star Wars issues 1-4, and Dark Horse Revenge of the Sith issues 1, 3, and 4. Any chance we could get comic packs of the missing Marvel SW #5 and 6, and Dark Horse ROTS #2, to complete their respective tales? (Just spitballing ideas: we could certainly do with a Leia/3PO pack for MSW#5 and perhaps a Rebel/Imperial Pilot set for #6, and ROTS #2 could use Grievous and a new deco Clone.) And what about Comic Packs for the other movie adaptation comics like Marvel ESB and ROTJ, or Dark Horse TPM and AOTC?
    2. - In the Clone Wars line, a few scale issues have come up. Obi-Wan and Anakin figures stand pretty short compared to their non-animated figure counterparts, while Clone Troopers stand unusually tall compared to their non-animated counterparts, and obviously this means CW Obi-Wan and Anakin stand pretty short compared to the Clones. What gives here? Was this an intentional choice, and if so, why?
    3. - Why are the Droid Factory build-a-droid parts for C-3PX incompatible with the basic figures' build-a-droid parts, especially the other protocol droids like RA7's? 3PX has a ball joint for his head while RA7 has a post, and the pegs for the arms and legs also differ, thus making it impossible to mix-n-match parts, which the concept had otherwise highly adopted. Was this done on purpose, and if so, why?
    4. - Does Hasbro have any plans to update the Dianoga in the near future? We need one that is better detailed, better articulated and perhaps featuring multiple bendy tentacles. If you were to update the Dianoga, what format would you release it in: Battle Pack, a basic carded figure, Ultimate Battle Pack, something else?
    5. - This might seem like an odd request, but could you re-issue the old Kenner X-wing, specifically the POTF2 version, with some modifications? There's no X-wing at kid pricing anymore, the only OT vehicles at the Starfighter pricepoint are lonely TIEs with nobody to fight, and that classic X-wing had some decent sculpting, strong wings, and is fun to whoosh about. As well, the POTF2 version had a pretty decent deco (though pre-applied stickers would be nice), and that version also had the best sound effects in any X-wing (aside from the Power FX X-wing, but the sacrifices there are numerous), those sounds alone would sell another batch to collectors. The set could use a tune-up on the cockpit interior, the canopy exterior, the dedicated R2-D2, and the blaster tips need to be reoriented to the proper upright position. Don't you think the kids today deserve an awesome X-wing fighter?
    6. - In a recent Q&A, you mentioned that "[Hasbro] will continue working with Sideshow on their 12" figure program." As we know, Sideshow sub-licenses their 12" Star Wars through Hasbro's Star Wars license, but the intricacies of this relationship are not fully understood. With your recent comment above, collectors are ever more curious as to how exactly Hasbro and Sideshow work together on that 12" figure line. What types of input does Hasbro have into the Star Wars items that Sideshow produces?
    7. - Beyond Star Wars, many other franchises have tried their hand at Titanium Series - Battlestar Galactica, Indiana Jones, Marvel, Transformers, even Stargate was floated as being in some level of planning - yet they all eventually faded away from Titanium Series' light. What lessons has the Titanium Series team taken away from those other licenses' lines and their passings? For example, you put off the wave with the BSG Basestar and couldn't find a slot for this new tooling before the license ran out, yet you released a Starbuck repaint of the Viper mk 2 at theproverbial 11th hour (and didn't hit shelves until the 13th hour), an unusual distinction which fans don't really understand, and could use more behind-the-scenes insight into - why didn't that Basestar tooling get shoehorned into a later wave before the license with Universal ran out? Why release a repaint vehicle that won't satisfy fans as much, rather than an all-new mold which fans have been clamoring for?
    8. - Regarding the future of Star Wars Mighty Muggs, what wave will be the final one at retail before the line becomes a TRU exclusive? Will some sought-after previous entries like Leia and the Stormtrooper be re-released? For Entertainment Earth's shared exclusives, who will they be sharing those with?
    9. - What was the decision making process behind creating a Jabba the Hutt animated figure instead of a Ziro the Hutt figure? Ziro has appeared in the Clone Wars series more than Jabba so far, and his animated behavior fits the Clone Wars animated series better than Jabba. Was it merely the character recognizability of Jabba, or the fact that you had existing accessories for him, or was the idea of an evil Truman Capote Hutt just too out there for ya?
    10. - On the Toy Fair slideshow image for the Walmart Droid Factory 2-packs, the Boba Fett shown with BL-17 doesn't appear to have the chest emblem on his armor, just like the majority of the Evolutions Boba Fett on which this figure is based. Was this merely a photography issue, will the final version of the Droid Factory Boba Fett be sporting the proper chest emblem tampo, or is the missing emblem to be expected on this set?
    11. - Are there any plans to make an R6-series Astromech Droid, either as a build-a-droid or a basic figure? This would be the realistic-styled droid with the unique head, not the Clone Wars version that's visually just another R2. We currently have R1 through R5 and then R7, but no R6. The only new tooling for R6 would be a new dome, as the body is the same as the R2 and similar. What about R8 and R9 droids?
    12. - Having worked on the modern line for some time now, you've no doubt had to look back at the original Kenner line's grand history many times when deciding what the future of the modern line will be. So you've seen it all and made yourselves familiar with figures, vehicles, accessories, cards, boxes, and even baggies from the '78 - '85 Star Wars line. With that in mind, what does the current team consider some of the most oddball, head-scratching entries from that original Kenner line? What types of things do you guys look back and you can't even imagine doing with the modern line? (And should we give Mark Boudreaux a free pass since he actually DID work on that original line, or pull a Sophie's Choice and make him take sides?)
    13. - C-3PO needs new figures from across the saga, it's sad but true. The original Ep I Threepio figure was quite good, but he needs knee and ankle joints, perhaps the ability to hold the Anakin Skywalker podracing flag, and a little more accurate deco with yellow eyes and slightly toned-down wires. Episode II Threepio's removable parts gimmick hampered this figure's design, and since then we've gotten the fantastically-sculpted U-3PO Build-a-Droid figure, so that mold could sport the Ep 2 Threepio deco. And then there's the OT Threepio, which you've recently said is hampered with vac-metal bodies because LFL is stuck on the concept over a painted look. However, your team has produced some great-looking shiny silver protocol droids lately without vac-metallizing, and Hasbro's Marvel Universe team has been able to produce 2 different tones of shiny, metallic-looking gold colors on a few Iron Man figures, which are still super-articulated. Is something of those qualities still not to Lucasfilm's approval, or might we finally be seeing a truly super-articulated Threepio soon?
    14. - In ye olden days, playsets were keen, but MICRO-scale playsets were really where it was at. Old-skool fans still to this day fondly remember Kenner's expansive Micro Collection series. And Galoob put themselves on the map in the mid-'90s with nearly 30 different creative, clever, fun Micro Machines playsets. Granted, Hasbro's stance on playsets for the 3.75" market is abundantly clear in that there's no mass market left there, but has any thought been put into playsets for the ongoing Galactic Heroes line? The brand's cute little styling could translate very well to playsets, and the brand has legs with both kids and collectors. Collectors love to put figures in context, and kids can always use environments to structure play patterns. The cardboard "playsets" from the recent battle packs are nifty, but kids play rough and cardboard doesn't take much abuse. Competitor Fisher-Price's Imaginext line has tons of creative and fun playsets around the same scale as G. Heroes which some kids have repurposed into Star Wars environments such as Jabba's Sail Barge from the pirate ship. So what about actual playsets for Galactic Heroes?
    15. - There's been a great focus on troop-building with prequel- and Clone Wars-themed battle packs, especially lately, with even more on the way. Reasonable, after all, it is "Star *Wars*". However, this tactic hasn't been done all that much with the Original Trilogy troops, there are no squad packs or anything of that nature (except for the Tantive IV pack). Understanding that there is more troop-oriented storytelling going on with the era, there are still plenty of kids and casual collectors who want to set up battles with Stormtroopers and Rebel Troopers from all 3 OT films, the battle packs themselves can help do the storytelling to guide play. So why aren't we seeing more troop-building Battle Packs for the OT?
    16. - Understanding that new tooling costs are a major prohibitive factor in creating playsets, has the Hasbro SW team considered digging out the original GI Joe Headquarters playset tooling to repurpose for the Clone Wars line? Its design is generic sci-fi enough that without resculpting it could pass as a Republic base - such as Rishi Station from "Rookiees" - with simply a different sticker sheet for the control panels. It has a landing pad, a hallway/garage for BARC Speeders, and basic features that keep costs down but fit Clone Wars play patterns. So, any thought given to this idea before? If not, what do you think, and what would its chances be?
    17. - Recently, pictures surfaced of a few Clone Wars two-packs based around specific episodes, including characters from "Ambush" and "Rookies". While these look to be great ways to expand episode-specific collections, they also cover existing or already-planned ground. Why were some one-off clones like Thire and Echo chosen for inclusion in these sets when they're also being released via other avenues? It seems like it would make more sense to keep these characters unique to one release so that collectors wouldn't have to choose between releases. Will we be seeing more of these screen scene-type 2-packs, and will they be covering more types of characters beyond just clones? Out of the 4 two-packs we've seen so far, the only non-clone is Yoda.
    18. - The end of the Titanium era has brought much dismay to collectors, not simply because of the grim unlikelihood for the future behind the "hiatus" status, but also because it leaves many great ships nearly impossible to find. Many Titaniums that saw limited releases or worse and were expected to get re-released in the future are now going to be mythical at best, such as the Gungan Bongo Sub (now doomed to be postponed into eternity), Trade Federation Landing Craft, Anakin's Podracer, Mon Calamari Star Cruiser, Rogue Shadow, Luke Skywalker's X-wing (Sculpt 2), AOTC Naboo Royal Cruiser, Droid Gunship, Hailfire Droid, P-38 Magnaguard Starfighter, and more. What with the line's demise skunking the fans out of some great molds, would it be possible to get any sort of limited rereleases of these incredibly difficult to acquire treasures - and the ones that almost made it such as the Bongo - as HasbroToyShop exclusives? If not, why not? Isn't seeing ANY financial return on molds that haven't made their money back better than no return at all?
    19. - Resculpts and Clone Wars outfits notwithstanding, there are 20 new outfits for Padme Amidala that you could still produce, and nine years left until your license expires. That said, what's your plan for our favorite queen-turned-senator? Relatively lackluster sales of Breha Organa, another regal female character, might point to a lack of interest in new Padme outfits; there's also the fact that many of the costumes are similar to one another in style and color, particularly her many dark blue and purple ROTS robes. However, when released in cautious numbers, Padme can fully sell through and satiate collectors. Do you plan on making all of her outfits over the course of the line? If not, then how many more do you think we can expect to see, and which ones are most likely?

    Vote now, and suggest new questions too. Thanks for participating!

  2. #2
    4, 6, 9, 11
    Most wanted "bottom-of-the-barrel scrapes": ANH: Kal'Falnl C'ndros, Revwien (concept art), Tzizvvt ESB: Wiorkettle, Treva Horme ROTJ: Cane Adiss, Loje Nella TPM: Edcel Bar Gane AOTC: Rogwa Wodrata ROTS: Mon Calamari Dancer, Veedaaz Awmetth, Eeusu Estornii EU: Guri (red outfit), Ket Maliss

  3. #3
    My votes are for 1 and 11 and:

    Any plans for improved versions of TPM C-3PO and AOTC C-3PO? TPM C-3PO just needs knee joints and yellow eyes. AOTC C-3PO could be a repaint of the C-3PO Ewok Deity or, since it wouldn't be vac-metal, the amazing U-3PO B.A.D. sculpt.

  4. #4
    5 and 6 for now.

    Asking an old question in a new way:
    Recently, when asked about creating a new C-3PO figure that wasn't held back in the articulation department by the traditional vac-metalized coating, you stated that it was essentially up to Lucasfilm and they were not happy with simply a metallic colored plastic. However, your Marvel Universe team has been able to produce shiny, metallic looking Iron Man figures that are still super-articulated. Is that not shiny enough for Lucasfilm? Or is that a technique that could potentially carry over into the Star Wars line? Preferably towards a shiny gold, super-articulated C-3PO?
    "To be concerned about being grown up, to admire the grown up because it is grown up, to blush at the suspicion of being childish; these things are the marks of childhood and adolescence… When I became a man I put away childish things, including the fear of childishness and the desire to be very grown up." - C.S. Lewis

  5. #5
    [FONT=Courier New]Just number 5 for me.[/FONT]
    [FONT=Courier New]"First of all, never bad mouth synergy..."[/FONT]

  6. #6
    4, 10 and 11 to start.
    Have: CW Yularen, CW Clone, everything from CW Slave I set except Slave I, TFU Shadow Stormtrooper x2, Evo Trooper, Saga AT-AT Driver, K-Mart Jodo Kast || Want: Vintage Fordo
    Thanks to TheDarthVader, Phantom-like Menace, TheRealDubya, Jediguy, Dark Marble, Umbra, Qui-Long Gone, CrunchyNug, GH_fan and jedikiss.

  7. #7
    Just a quick note, the final date for these is July 2nd, I'll be sending them in on June 30th.
    Darth Vader is becoming the Mickey Mouse of Star Wars.

    "In Brooklyn, a castle, is where dwell I"
    The use of a lightsaber does not make one a Jedi, it is the ability to not use it.

  8. #8
    Questions 12 - 13 added.

    12 is mine, if you are wondering where that came from.

    Quote Originally Posted by vger View Post
    Any plans for improved versions of TPM C-3PO and AOTC C-3PO? TPM C-3PO just needs knee joints and yellow eyes. AOTC C-3PO could be a repaint of the C-3PO Ewok Deity or, since it wouldn't be vac-metal, the amazing U-3PO B.A.D. sculpt.
    See next...
    Quote Originally Posted by bigbarada View Post
    Asking an old question in a new way:
    Recently, when asked about creating a new C-3PO figure that wasn't held back in the articulation department by the traditional vac-metalized coating, you stated that it was essentially up to Lucasfilm and they were not happy with simply a metallic colored plastic. However, your Marvel Universe team has been able to produce shiny, metallic looking Iron Man figures that are still super-articulated. Is that not shiny enough for Lucasfilm? Or is that a technique that could potentially carry over into the Star Wars line? Preferably towards a shiny gold, super-articulated C-3PO?
    May as well combine these since it's all 3PO-oriented. Each of you has a vote counted for the combined question.
    Darth Vader is becoming the Mickey Mouse of Star Wars.

    "In Brooklyn, a castle, is where dwell I"
    The use of a lightsaber does not make one a Jedi, it is the ability to not use it.

  9. #9
    1 and 12 for me. Thanks!
    [FONT=Palatino Linotype]"There was Rocketman, trying to get out, and here comes the cliff, and just before the car went off the cliff, he jumped free! And all the kids cheered! But I didn't cheer. I stood right up and started shouting. This isn't what happened last week! Have you all got amnesia? They just cheated us! This isn't fair! HE DID'NT GET OUT OF THE COCKADOODIE CAR!" - Annie Wilkes [/FONT]

  10. #10
    Put me down for a vote on #12 as well.
    "To be concerned about being grown up, to admire the grown up because it is grown up, to blush at the suspicion of being childish; these things are the marks of childhood and adolescence… When I became a man I put away childish things, including the fear of childishness and the desire to be very grown up." - C.S. Lewis

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO