Page 1 of 5 12345 LastLast
Results 1 to 10 of 120

Hybrid View

  1. #1

    QUESTIONS FOR HASBRO - round 89

    Please post your VOTE for up to 4 {four} of the questions provided in this thread, letting us know which ones you most want to see asked in January. Keep in mind that your votes in round 88 do not count in this round, so if your question is still on the list you may want to vote for it again.

    Also, feel free to post new questions. For reference, here are Hasbro's answers to previous SSG questions; and from other sites. The questions we asked last round can be found here.

    Current questions (vote for up to 4):

    1. - The initial Force Unleashed figures were released well before the actual game, and many of the cooler figures sold quickly and were hard to find by the time the game was released. Of the major characters, the Jumptrooper, Evo Trooper, Vader, and Galen Marek have seen a few re-releases, while Juno Eclipse (sadly) still languishes on store shelves in many areas. One figure that was never re-released though is Rahm Kota, who was one of the first figures to vanish upon the initial release, and has since appeared in other Star Wars media, including a different video game. Given that he is likely to appear in a major role in The Force Unleashed II later this year and the 2 exclusive TFU 5-packs were released in May, are there any chances Kota might be re-released as a Greatest Hits figure, or perhaps even updated with a new, more actor-accurate and 'blinded' head sculpt, as well as a deactivated saber hilt for his shoulder scabbard?
    2. - Force FX has entered a new phase with the removable blade series, and so far we've seen the first couple waves. Thanks to Clone Wars, female characters are back on the rise in Star Wars and bringing in more female collectors - Ahsoka especially has been selling very well. What does the future of Force FX look like? What are the chances of Ahsoka's lightsaber being added to the Force FX line, better opening that market up to female consumers and getting Clone Wars main character recognizability?
    3. - In the upcoming Battle Over Endor multipacks, you've included a figure of Lt. Yong, the Y-wing pilot from ROTJ that flies (and dies) under the handle Gray 3, but the torso used on the figure is the existing B-wing pilot design rather than a Y-wing pilot torso. On the ROTJ Y-wing pilot costume, the collar is different and the chest box and apron are more like the POTF2 Lt. Yong figure (at the time he was misidentified as Arvel Crynyd, but it was Yong's helmet, face, and Y-wing pilot torso and apron just in the wrong color - red instead of gray). Is this new Lt. Yong using the B-wing pilot torso a mistake, or just a cost-saving measure? In either case, if there are future ROTJ Y-wing pilot figures down the line, will we get a new movie-accurate torso for them with the unique costume chest box and apron, and closed collar?
    4. - You have this nice new Qui-Gon Jinn figure that came out in the Jedi Evolution set, and has been re-released in the nifty Eopie mail-away set, yet both times the figure has been marred by including the blobby 1999 lightsaber accessory. Luke Jedi keeps coming out with either repaints of the ROTS Obi-Wan's lightsabers (which has different details), or worse, the blobby Obi-Wan POTJ saber from 2000. Both the '99 Qui-Gon and '00 Obi-Wan as Luke Jedi sabers also have the old smooth blade design without the flare on top of their soft hilt sculpting, and both Qui-Gon and Luke Jedi actually had better saber accessories designed during the Saga line, yet we never get them. And what about one of the most iconic lightsabers in recent SW memory, Darth Maul? There is no modern-quality version at all, the closest is the '02 Saga metal hilt with removable blades, but the blades break easily, so we haven't seen it in a while, and it's a bit long. We don't have a deactivated one to hang on a belt, don't have a 1-blade-activated version, don't have a "cut in half" version, Maul is pretty lacking for his weapon. Why are we getting old junky saber accessories with the modern versions of these guys? Why aren't we seeing better, more accurate lightsaber accessories for some of these fairly major, recognizable Jedi characters? And will these issues be addressed soon?
    5. - With TVC, fans have been anticipating figures that should have been included in the classic Kenner line but didn't get done. One of these highly-anticipated additions was the Sandtrooper, however the actual carded figure that we received in TVC wave 2 leaves a lot to be desired, beyond the clean paint job issue. For one, the choke warning box not only cuts off the top of the iconic Luke & Leia image that was a signature of the early card designs, but it actually cuts into the main Star Wars logo itself. Then there is the problem with the orange field behind the figure being significantly too short and not lining up properly with the bubble. Finally, fans are disappointed at the decision to use an image from the Special Edition of ANH for the card photo (where the trooper is covering up his face with an accessory that isn't even included with the toy), instead of a picture from the original release of the film. Can the choke warning box be moved or made less intrusive so it's not interfering with the artwork, and can we expect to see future rereleases of this figure with a better, non-Special Edition, card photo (with maybe different pauldron colors for the figure itself)?
    6. - Yavin ceremony Han Solo is finally coming soon, and it's long overdue. Hasbro imagery has come out for the figure, and unfortunately what's shown isn't remotely accurate. In the film, Han is wearing a different shirt for the ceremony than he wears the rest of the time - it has no seam anywhere on the front all the way up to the top, and the collar is flipped down under the pressed vest. However, this upcoming figure is shown using the '04 VOTC body with rumpled vest, the shirt with the open collar and shorter sleeves, and it's using the unfortunate recent Death Star likeness which is a different expression and hairstyle, meaning Han's going to look like a schlub at the ceremony. It's understandable that this figure was put together quickly, using existing parts to get it out fast, but it's regrettable and disappointing. Is there any hope that the figure will get a more-accurate update at some point in the future - if not a running change, then some other release down the road?
    7. - A couple of POTF2-era favorites now have the opportunity to get updated to modern quality without a significant investment, that of Orrimaarko and the Mon Calamari officer. Orrimaarko really would be easy based off the recent Major Panno figure with an eyepatch and slight changes to the deco, and the third and final briefing room Dressellian would be an even easier recolor. The Mon Calamari officer would mainly just a new helmet, deco, and rank badge change to the new Admiral Ackbar figure - there's even room for multiple deco changes since the Mon Cals had different skin patterns in the film. These updates would go a long way towards filling out the Death Star 2 briefing and the Home One bridge during the battle while minimizing tooling costs. Would any of these ideas be in our foreseeable future?
    8. - Vader's TIE Advanced X1 has been using the same POTF2 mold for over 13 years now, and the design is showing its age. The cockpit hatch is all wrong, the window is too small, the implementation of action gimmicks hurts the movie-accuracy and just aren't that fun, the cockpit isn't terribly accurate or sized that well to modern Vader figures, and the color is the blue-gray color of ESB and ROTJ rather than the proper gray color of ANH - the only film it was in. This is Vader's signature vehicle, it should at least live up to the quality of the other vehicles in the line, much less represent one of the brand's top characters - especially since the Hasbro SW team's vehicle designs have been so good lately too. What are the chances of seeing something done to address those issues on Vader's TIE Advanced X1 in the foreseeable future?
    9. - A few years ago, we asked about the chance for updating the role-play Han Solo Blaster and Stormtrooper Blaster accessories, and your response was a not at that time because they weren't supported by then-current entertainment. The existing role-play Stormtrooper and Han blasters are molds from the late '70s, now technically 5 decades old. While they do have some pretty decent design for items from that era, compared to Hasbro's newer role-play blasters, they come up a bit lacking in accuracy and features. We don't expect all-black movie accuracy due to safety concerns, but on those 2, the seams are a bit uncomfortable to hold, the lights and sounds don't deliver all that effectively and don't rapid-fire nicely; and on the Stormtrooper blaster, the stock is still missing in action, and there's never been a clip. With ANH being re-released next year on Blu-Ray, and in theaters in a few years, it seems like there are going to be opportunities to deliver updated versions of those 2 iconic blasters in the role-play lineup, so is there any chance of seeing that happen?
    10. - In late 2010, you released 2 new TIE Fighters, the small-wing ESB-color TIE Fighter in vintage box, and the updated Walmart-exclusive TIE Bomber, neither of which came with a packed-in pilot figure - the Bomber is the first above-starfighter-pricepoint TIE exclusive to be released without a pack-in pilot figure. At the time of these latest TIE Fighter releases, the only TIE Pilot figure available was in the limited edition Target-exclusive 9-pack, with later opportunities being just the 2 TRU-exclusive Endor Pilots 4-packs scheduled for January 2011 - those are fairly limited avenues for the backbone of the Imperial Navy, many casual collectors won't even know about those sets and thus will have no pilots for their TIEs. The most current TIE Pilot figure is from the Evolutions mold, which has awkward hips and no ankle articulation, and the wrong jumpsuit texture design; meanwhile, your recent Imperial Scanning Trooper figure is nearly perfect for the TIE Pilot needs since they're the same costume in the films and that figure looks better, it just needs gloves, chest armor, a different head and a helmet, and maybe a slight retool of the left upper arm to remove the code cylinders. Will there be a less limited way to get Pilots for the recent TIE Fighters coming up, specifically a basic-carded release like TVC or Saga Legends? And what about that being a new figure using the Scanning Trooper body?
    11. - We understand the need to anchor the Vintage line with core characters in order to preserve the longevity of the toy line, but what about at least changing up the cardback images to give the longtime collectors something to get excited about? For instance, we know we don't have to twist your arm very hard to get you to rerelease a Darth Vader figure; but would you consider repacking the current TVC figure on a Star Wars card or, even better, on a ROTJ card with a Sebastian Shaw 'Vader Unmasked' reference photo (the figure could be packed in the bubble with his helmet off)? We know you're doing this with the Luke Jedi figure, but that's more a case of expressing the right version of the character to match that figure; this would serve the dual purpose of keeping the core characters in circulation for the casual collectors while giving the hardcore collectors something else to look forward to. Package variations existed back in the original line with different backs, and under different movie lines, and a few even had different pictures, so there is classic justification for it.
    12. - With themed waves going away, what will be the general method for planning new waves? It used to be a school of thought that said "1 army builder, 1 alien, 1 main character" et cetera, but that was when the choices for that wave were merely from a single movie scene rather than the entirety of Star Wars. What aspects will upcoming wave planning keep from the last 3 years, and what will change?
    13. - Sgt. Bric's initial cartoon outing turned out to be kind of a bust. The character was an unmemorable jerk and didn't really add anything to his storyline. In fact, if not for the action figure you guys did, he'd be a complete nobody in 2010. And on top of that, the postage on his set when it arrived in Los Angeles was a whopping $5.15, so after the cost of the box and the handling, just getting it out the door probably ate the entire $6.99 right there. Combine that with the fancy packaging and the battle mat, and the fact that he's 100% new tooling with some pricey-looking (for CW) paint, and it seems like Bric's quite an expensive promotional venture for Hasbro to have undertaken... all for a minor jerk of a character. What is it about Bric that made you choose him for a big Clone Wars mail-away promo figure?
    14. - From early pictures, it appears the upcoming R5-D4 figure will not have the painted red panels on his back. That might sound like a minor issue, but the panels are clearly visible in the film when the droid's motivator blows up, and they help give the little guy a bit more visual pop. Neither the 1996 nor the 2006 versions of R5-D4 had these painted either, so it's disappointing to see that the third time is not the charm (though it remains a detail that the original vintage figure got right). Given the number of running changes we've seen so far in The Vintage Collection, is it at all possible that this oversight might be changed on future shipments?
    15. - The Force FX lightsabers are targeted at adult collectibles, for a group who generally desire accuracy in their prop collectibles, and yet the latest ROTS Obi-Wan's lightsaber with removable blade suffers a big inaccuracy due to the blade needing to be securely anchored. However, with your removable-blade designs, you've started using dummy parts to fill in the removed blades, and we wonder if you'd consider for future thin-necked lightsabers like Luke ROTJ and Obi-Wan having the removable blade take the entire thick "neck" with it and having a more accurate thin-necked dummy design replace it. That much weight anchoring has been accomplished before in the thick metal coupler for the Maul saber halves that screwed together, on these thin-neck sabers the neck could screw down to the top part of the grip. That would let collectors have their cake and eat it too by giving an accurate hilt prop display with the thin neck, while still having the light-up blade play using the thick neck. So has there been any consideration for that sort of thing, and might it be seen in future Force FX sabers when needed?

    Vote now, and suggest new questions too. Thanks for participating.

  2. #2
    I can only vote for 4 of them? But there are so many to choose from.

    Anyways, just #3 for now.

    Here's an idea for a new question:

    With the expansion of the Vintage line to include figures that were never actually offered in Kenner's original lineup, fans have been greatly anticipating the inclusion of figures that "should have been" included in the vintage Kenner line, but were left out for one reason or another. One of these highly anticipated additions was the Sandtrooper. However, the actual carded figure that we received in wave 2 leaves a lot to be desired. For one, the warning label not only cuts off the top of the iconic Luke & Leia image, that was a signature of the early card designs, but it actually cuts into the main Star Wars logo itself. Then there is the problem with the orange field behind the Sandtrooper figure being too short and not lining up properly with the bubble. Finally, many fans have expressed disappointment at the decision to use an image from the Special Edition of ANH for the card photo (where the trooper is covering up his face with an accessory that isn't even included with the toy), instead of a picture from the original release of the film. Can the warning label be moved to a different part of the card so it's not interfering with the artwork and can we expect to see future rereleases of this figure with a better, non-Special Edition, card photo (with maybe different pauldron colors for the figure itself)?

    It's almost two separate questions, so I can reword it that way if you want.
    "To be concerned about being grown up, to admire the grown up because it is grown up, to blush at the suspicion of being childish; these things are the marks of childhood and adolescence… When I became a man I put away childish things, including the fear of childishness and the desire to be very grown up." - C.S. Lewis

  3. #3
    A question I had when the wave 5 pictures came out:

    *Yavin ceremony Han Solo is finally coming soon, and it's long overdue. That said, it isn't completely accurate. In the film, Han throws on a different shirt for the ceremony than he wears the rest of the time - close to what Lando wears at the end of ESB, but with the collar under the vest. However, the figure appears to use the same body from the 2004 Vintage release, with the open collar and bunched-up sleeves meaning Han's going to look like a schlub at the ceremony. It's understandable that this figure was put together quickly, using existing parts to get it out fast, but it's regrettable. Is there any hope that the figure will get a more-accurate update at some point in the future - if not a running change, then some other release down the road?
    My Photos and Reviews: SSG Toy Guide
    My Star Wars Fan Film: The Lazy Jedi
    Follow Me: Twitter | Instagram

  4. #4
    As for #6, Han's Hideout asked a somewhat similar question:

    2) Ooh look - Han! We were happy to hear that our favorite made the cut for 2011 Wave 1. Then, we were a bit sad when we saw what we were getting... it's just the recent Death Star Escape Han with a different belt and a medal. Why no leg strap for the holster? Why no upgrade to the torso to give us a screen-accurate buttoned-up shirt? We appreciate the effort to give us a 'new' Han, but we have to admit that we're a little disappointed with the end result.

    ** Sorry that the end-result did not measure up to what you had hoped to see for this figure. We cannot get to all of the tooling we want to every year, and we felt we could do a great version of Medal Ceremony Han with the tooling we had available.
    So I don't know if there's much juice left in our question. It would probably end up with a "we'll get an update out there, but not for a few years" so I don't know if it's worth it.
    My Photos and Reviews: SSG Toy Guide
    My Star Wars Fan Film: The Lazy Jedi
    Follow Me: Twitter | Instagram

  5. #5
    Question 11 added.

    Quote Originally Posted by Mr. JabbaJohnL View Post
    As for #6, Han's Hideout asked a somewhat similar question:


    So I don't know if there's much juice left in our question. It would probably end up with a "we'll get an update out there, but not for a few years" so I don't know if it's worth it.
    Frustrating answer. I'm going to leave the question up for this round, see if people really want to ask if we'll see a better one, but if it doesn't get the votes I'll pull it at the next round.


    Quote Originally Posted by bigbarada View Post
    I hate the disrespectful and "spoiled brat" tone of this question, but Hasbro's answer is great and prompts me to ask another question:



    Translation: "It's your stupid figure choices that are going to doom the line, idiot!" but they just phrased it more tactfully.

    Anyways, the question this raises:

    We understand the need to anchor the Vintage line with core characters in order to preserve the longevity of the toy line; but how about at least changing up the cardbacks to give the longtime collectors something to get excited about? For instance, we know we don't have to twist your arm very hard to get you to rerelease a Darth Vader figure; but would you consider repacking the current TVC figure on a Star Wars card or, even better, on a ROTJ card with a Sebastian Shaw 'Vader Unmasked' reference photo (the figure could be displayed with his helmet off in the bubble for maximum coolness)? This would serve the dual purpose of keeping the core characters in circulation for the casual collectors, as well as giving the hard core collectors something to look forward to.
    Yeah, the tone in that question was very jarring IMO.

    Interesting idea, I'll add it.


    Quote Originally Posted by Slicker View Post
    As I've stated many, MANY times before I personally believe that they should only do the "vintage" figures that were actually released on vintage cards. Otherwise they're just bastardizing and, in my opinion, insulting the original line-up.
    Their thinking is that they're continuing it, that this is "what would have been" had Kenner kept going. As long as the card backs look the way they do, I don't think there's any confusing the modern vintage-style figures with true vintage.


    Quote Originally Posted by Cane_Adiss View Post
    How come we haven't gotten our answers back from hasbro this time around? I was looking forward to the answer about Cane Adiss!
    We don't yet know where the answers are, the PR department that mails them was on vacation when we tried to get back to them as to the status of our missing Q&As. We'll know tomorrow what's going on, I hope, but I get the feeling that we've been skunked yet again.
    EDIT: Just got word, Hasbro says they never got our emailed submissions, so we have missed this round as well as the missing Transformers Q&As. That also puts this current thread into a tailspin, not sure what to do yet.

    Quote Originally Posted by DarkJedi5 View Post
    Hey BigB, would you be game for a slight rewording? I know the gist of your question is really aimed at the cardback more than the figure but I would really like to see the TVC Vader slightly retooled so that the right hand can hold his lightsaber. Heck, they could even just take the hand from TAC-16 and kitbash it but I am so sick of Vader not being able to hold a saber in his right hand!
    Quote Originally Posted by bigbarada View Post
    Well, that's kind of a separate question and I would hate to tack on a side query only to have Hasbro address that and completely ignore the gist of the question which is adding some variety to the TVC Vader cardbacks.
    Yeah, BB's right, that's something entirely else.


    Quote Originally Posted by Tycho View Post
    NEW QUESTION:

    Will Hasbro work on a retailer to carry a Clone Wars Exclusive set with the NON-action* figures, (like the Senators)? Maybe with Entertainment Earth, who carried the Death Star Briefing scene.

    Padme Amidala
    Satine of Mandalore
    Ocanda Farr of Rodia
    Bail Organa of Alderaan
    Supreme Chancellor Palpatine

    *Actually, all these characters+ used weapons in action scenes (Farr on Rodia when he captured Nute Gunray)

    +OK, Palpatine didn't use a weapon as "the Chancellor," but he IS the Chancellor anyway - and could come with a hidden lightsaber, just for the fun of it.

    Don't name the figures I just did, JT, if the question is too specific.
    It's not about specifics in this case, it's the fact that it's like asking for a new pack-in that's a bar of gold. Your idea is "we know these figures are too unpopular to be able to make their money back at main retail market, so could you just make them anyway and then sell them through an even smaller retail venue, thus guaranteeing them less sales and thus less chance of making their money back?" You're asking for an entire wave's worth of new tooling budget shoved into figures that aren't going to sell, so your idea is to make them a multipack which further lowers the chance of sales AND raises the price, and then make it an exclusive which further lowers the chance of sales and raises the price AGAIN. Hasbro is saying there's not enough market for these, collector-only sales aren't going to return their investment, your idea only gets sucked into that void.
    Darth Vader is becoming the Mickey Mouse of Star Wars.

    "In Brooklyn, a castle, is where dwell I"
    The use of a lightsaber does not make one a Jedi, it is the ability to not use it.

  6. #6
    Quote Originally Posted by bigbarada View Post
    Well, that's kind of a separate question and I would hate to tack on a side query only to have Hasbro address that and completely ignore the gist of the question which is adding some variety to the TVC Vader cardbacks.
    Quote Originally Posted by JediTricks View Post
    Yeah, BB's right, that's something entirely else.
    Please allow me to explain my thinking; because BigB mentions the TVC Vader specifically, I am concerned that they will think that we have decided it is a flawless figure and that they have attained some sort of "Vader perfection." Let me know if that sounds crazy, I just feel like it's a figure that could still use some work and if we ask about it specifically then they may think we really like it. If BigB had never cited that specific figure I never would have asked to piggyback my question. That's all.
    Have: CW Yularen, CW Clone, everything from CW Slave I set except Slave I, TFU Shadow Stormtrooper x2, Evo Trooper, Saga AT-AT Driver, K-Mart Jodo Kast || Want: Vintage Fordo
    Thanks to TheDarthVader, Phantom-like Menace, TheRealDubya, Jediguy, Dark Marble, Umbra, Qui-Long Gone, CrunchyNug, GH_fan and jedikiss.

  7. #7
    I hate the disrespectful and "spoiled brat" tone of this question, but Hasbro's answer is great and prompts me to ask another question:

    Rebelscum: The latest lineup announced for TVC WAVE 5 is TIRED to say the least! You say this is a "Collector's" line... but where is the "Collector's" love?? Surely you realize "Collectors" own these already (Times 10!) The product seems out of sync with the target.

    Everyone I know believes that the Vintage line would fare much better if we finally started seeing NEW CHARACTERS on Vintage Cards!!! Wasn't that the whole point? We need more Cantina Aliens! And more faces that fans should have saw back in 78 / 79 - the slimmest lineup of Vintage backs ever!

    Please tell me more unproduced faces from ANH are on the way! Or at least faces new to these card back stylings??? Enough with the re-repacks! We demand FRESH faces on Vintage Cards. C'mon!!! You guys are burning up all the good will fans have towards repacks. We must see NEW CHARACTERS on the CLASSIC black and silver card back!!! And SOON or else this line is DOOMED.


    Hasbro: We understand your passion for seeing new figures, but we also have to say that, almost four months into the re-release, that the best decisions we have made are including the highly recognizable repack figures as the anchors of the line. The response has been phenomenal to say the least.

    We have to be careful, as always, with how many of the more obscure and non-iconic characters that we do because they, and not the repacks, are the ones that risk "dooming" the line if not properly waved in with the more recognizable characters.

    Long-time fans know that Bom Vindin, Weequay Skiff Master, Fi-Ek Skirch, and Bariss Offee (all of whom will be out in several months) owe their existence to the more popular characters that we leverage to keep line productivity at a high level.

    If we just focused on new and obscure characters, this line would be dead in a hurry, and we love it too much for that to happen. Patience will be rewarded.
    Translation: "It's your stupid figure choices that are going to doom the line, idiot!" but they just phrased it more tactfully.

    Anyways, the question this raises:

    We understand the need to anchor the Vintage line with core characters in order to preserve the longevity of the toy line; but how about at least changing up the cardbacks to give the longtime collectors something to get excited about? For instance, we know we don't have to twist your arm very hard to get you to rerelease a Darth Vader figure; but would you consider repacking the current TVC figure on a Star Wars card or, even better, on a ROTJ card with a Sebastian Shaw 'Vader Unmasked' reference photo (the figure could be displayed with his helmet off in the bubble for maximum coolness)? This would serve the dual purpose of keeping the core characters in circulation for the casual collectors, as well as giving the hard core collectors something to look forward to.
    "To be concerned about being grown up, to admire the grown up because it is grown up, to blush at the suspicion of being childish; these things are the marks of childhood and adolescence… When I became a man I put away childish things, including the fear of childishness and the desire to be very grown up." - C.S. Lewis

  8. #8
    That definitely was a VERY di**head way to ask that question.

    As I've stated many, MANY times before I personally believe that they should only do the "vintage" figures that were actually released on vintage cards. Otherwise they're just bastardizing and, in my opinion, insulting the original line-up.
    Up, up, and OKAAAAY!!!

  9. #9
    How come we haven't gotten our answers back from hasbro this time around? I was looking forward to the answer about Cane Adiss!

    BTW Happy Thanksgiving everyone!
    Most wanted "bottom-of-the-barrel scrapes": ANH: Kal'Falnl C'ndros, Revwien (concept art), Tzizvvt ESB: Wiorkettle, Treva Horme ROTJ: Cane Adiss, Loje Nella TPM: Edcel Bar Gane AOTC: Rogwa Wodrata ROTS: Mon Calamari Dancer, Veedaaz Awmetth, Eeusu Estornii EU: Guri (red outfit), Ket Maliss

  10. #10
    Quote Originally Posted by bigbarada View Post
    We understand the need to anchor the Vintage line with core characters in order to preserve the longevity of the toy line; but how about at least changing up the cardbacks to give the longtime collectors something to get excited about? For instance, we know we don't have to twist your arm very hard to get you to rerelease a Darth Vader figure; but would you consider repacking the current TVC figure on a Star Wars card or, even better, on a ROTJ card with a Sebastian Shaw 'Vader Unmasked' reference photo (the figure could be displayed with his helmet off in the bubble for maximum coolness)? This would serve the dual purpose of keeping the core characters in circulation for the casual collectors, as well as giving the hard core collectors something to look forward to.
    Hey BigB, would you be game for a slight rewording? I know the gist of your question is really aimed at the cardback more than the figure but I would really like to see the TVC Vader slightly retooled so that the right hand can hold his lightsaber. Heck, they could even just take the hand from TAC-16 and kitbash it but I am so sick of Vader not being able to hold a saber in his right hand!
    Last edited by DarkJedi5; 11-27-2010 at 10:40 PM. Reason: Damn autocorrect switched "cardback" to "cardiac".
    Have: CW Yularen, CW Clone, everything from CW Slave I set except Slave I, TFU Shadow Stormtrooper x2, Evo Trooper, Saga AT-AT Driver, K-Mart Jodo Kast || Want: Vintage Fordo
    Thanks to TheDarthVader, Phantom-like Menace, TheRealDubya, Jediguy, Dark Marble, Umbra, Qui-Long Gone, CrunchyNug, GH_fan and jedikiss.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO